You are here


perthmtb.asn.au

whiskers's picture

Mavic wheels

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

Just wondering if his would be covered on warranty only used for commuting nothing too hard just fast brought from my lbs theres a crack either side of the spoke

Sent from my iPad

tzar_i's picture

Hen's teeth

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

I've broken the inner plate on a Shimano SLX M675 10 Spd Shadow + GS (Medium cage) derailleur. Anybody know where I could get a spare? I can't seem to find one anywhere this side of the equator!

Ellsworth Joker's picture

Tubeless Burping

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

I've got my shiny new Nobby Nics and thought I may lose my tubeless cherry by converting soon. However, after much forum reading, burping seems to be a problem for heavier blokes like myself (circa 90kg inc gear) when running anything below 30PSI.

My concern is, by having higher pressures to avoid burping does this not negate the benefits of running tubeless by benefiting from lower pressures?

As usual your combined wisdom would be greatly appreciated.

PS. I'm running Mavic EX729 (26").

Ellsworth Joker's picture

Nobby Nic Trailstar and Pacestar

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

OK. Just rode the KC circuit this morning and it's time to hang up my very worn tires - it was like riding on ice (frozen water not Meth).

I'm about to buy some Nobby Nics and just wanted to know which compound to use on the front and back.

Cheers.

PS. Saw an awful lot of blokes clad head to toe in lycra this morning on the trails....sinister.

badchef's picture

Dvo diamond

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

Gday all, im interested in the dvo diamond fork,just wondering if anyone has one and what they think of it...its this or a pike,thanks in advance

MrMez's picture

Reverb post stuck

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

Upgraded my dropper post to a 150mm reverb stealth.

First ride today, worked fine until almost at the end, it wouldn't come back up. Even pulling did nothing.

Had a look tonight, and managed to pull it out by hand with a little force, but now it won't go down.
I've tried the following:

Bled the remote
Bled the entire system
Topped up the air
Let all the air out
And generally checked over everything I can think of, still no joy.

The system bled fine, and the remote had a reasonable amount of pressure to it.

Any ideas?

Nizi75's picture

My stolen bike

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

Hi my bike got stolen 3 weeks ago
I was wondering if any one has seen it

It's a 2 Month old bike
Nina

Stixs9's picture

DH/Free ride knee pads

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

Hi all,

Just wondering if anyone has any knee pads that they would recommend on getting for mix of riding: trail, DH, and free ride.

I am after a knee pad that is not so bulky but still protects you when ya fall off. Let me know what you think..

Thanks

[Mod. moved to MTB gear. Please do not SHOUT]

Jay83's picture

Chris king wheel build

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

Have some shiny new chris king hubs, what rims should I lace them too for AM riding. Carbon or alloy?
Cheers

[Mod. moved to MTB gear]

lloydjones's picture

Giant Reign 3 Suspension Bearing

NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.

Hey all,

I bought an old Reign 3 '05 last year and finally got round to rebuilding it.

When I took apart the rear suspension, the upper bearing (i think its called the seatstay pivot, refer to pic) both just fell in pieces. Not sure if that what those bearings are meant to do but never seen that before.

I have bearings for the rest of the suspension set up but need to replace these smaller ones.

Does any one know the model or specs of the bearings i need to get?

Any help would be appreciated.

Best Mountain Bike